HomeTech UpdatesYou'll be able to mod the Google Pixel 6a...

You’ll be able to mod the Google Pixel 6a and bump the refresh fee as much as 90Hz

In a nutshell: Google’s midrange champ, the Pixel 6a, is likely to be higher worth than it appears at first blush. Following some hypothesis that the cellphone may secretly have a 90 Hz panel, a developer discovered a approach to overclock it from 60 Hz to 90 Hz with a mod that appears to be fairly dependable.

It began when some curious builders seen that the Pixel 6 and Pixel 6a share an integral piece of show {hardware}: one thing that their software program acknowledges because the s6e3fc3, which the builders thought was the panel or its controller. In principle, then, if the Pixel 6 helps a 90 Hz refresh fee, the 6a ought to, too, and may very well be restricted to 60 Hz by software program, not {hardware}.

Working from this principle, a developer referred to as TheLunarixus got here up with a approach to see if the Pixel 6a’s panel was overclockable. He took the 6’s show driver and software program bundle and blended it with the 6a’s model of Android 13, then flashed the outcomes to his 6a. With that, the choice to allow the 90 Hz mode appeared in his 6a’s developer settings, and when he switched it on… it labored.

He shared the software program bundle he had pieced collectively and his fellow fans, together with Sean Hollister at The Verge who was in a position to replicate the end result. There have been some minor points posted to Twitter that Lunarixus was largely in a position to troubleshoot, apart from a persistent drawback with the panel’s colour calibration, or lack thereof. A number of customers complained a few inexperienced tint that appeared after the mod was put in, even earlier than the 90 Hz mode was enabled.

In any other case, the testing to date has proven that the Pixel 6a can reliably overclock its panel to 90 Hz with out inflicting any catastrophic {hardware} failures. TheLunarixus is fast to level out that the mod leaves the panel’s default voltages and energy consumption intact, which makes injury to the {hardware} unlikely.

However one query goes unanswered: is that this a typical overclock that takes benefit of the {hardware}’s headroom, or was this a function that Google determined to disable in software program? Sadly, neither Google nor Samsung, the panel’s producer, have answered that query but.

Additional investigation revealed that the s6e3fc3 gadget is not the panel in any case, however most certainly the driving force for the controller. It is nonetheless unclear if there are similarities between the Pixel 6 and 6a’s panels, which do differ in each decision and measurement.

In the intervening time, we might advocate in opposition to making an attempt this mod out for your self except you could have a spare three-month previous Pixel 6a one way or the other. On the upside, TheLunarixus says that he is engaged on a easy ROM for the mod that may make it virtually plug and play, and it is likely to be value contemplating then.

Picture credit score: Thai Nguyen